News & Blog
Conical Head

Conical Head

Conical heads come in different shapes, sizes, and purposes

10

2024

/

12

Analysis of Cracking Failure Causes in Composite Board Heads

Analysis of Cracking Failure Causes in Composite Board Heads

During the manufacturing of a DN6200 composite plate elliptical head (hereafter referred to as the composite plate head), a company encountered repeated instances of cracking. The head's base material (outer layer) is 16MnR carbon steel with a thickness of 20 mm, while its inner wall material consists of 316L stainless steel with a thickness of 4 mm. The head has a diameter of 6200 mm.

09

2024

/

12

Comparison of Head Types: Hemi, SE, F&D, and Flat

Comparison of Head Types: Hemi, SE, F&D, and Flat

A cylindrical shell is fabricated using 0.500-inch-thick SA-516 Grade 70 material, which is rated for 20,000 psi at 100°F. The shell is rolled to an outside diameter (OD) of 48 inches, resulting in an inside diameter (ID) of 47 inches. The cylinder, along with the seams connecting it to any attached heads, undergoes full radiographic inspection. No corrosion allowance has been factored into the design. According to ASME Section VIII, Division 1, the calculated design pressure for this cylinder is 420 psi.

09

2024

/

12

Is the elliptical carbon steel head material resistant to high temperature?

Is the elliptical carbon steel head material resistant to high temperature?

Oval carbon steel head is a special material commonly used for connecting containers and pipelines

09

2024

/

12

What is the material and durability of the beer fermentation tank head?

What is the material and durability of the beer fermentation tank head?

The beer fermentation tank is a key equipment in beer brewing. As an important part of the beer fermentation tank, the material and durability of the head have an important impact on the quality of beer brewing and the service life of the equipment

09

2024

/

12

Comparison of Cold and Hot Forming Characteristics for Head Manufacturing

Comparison of Cold and Hot Forming Characteristics for Head Manufacturing

Cold forming and hot forming processes is different for head manufacturing.

09

2024

/

12

<1234567>
Shandong Dayou Industry Co.,Ltd

Phone

+86-13854893387

Quick links

About Us

Services

Contact

Product Category

Contact Us

+8613854893387

+8613854893387

[email protected]

34VW+XVP, Daiyue District, Taian, Shandong, China, 271025

Shandong Dayou Industry Co.,Ltd